Melissa Pendant Tutorial | Kelly J Jewellery.

Описание: Hello and welcome to my latest tutorial.

For this one you'll need a drilled stone, and the hole needs to be large enough to fit 2 base wires through.

This one doesn't use much wire, and is a quick project if you don't have much time.

To make this pendant, you will need -
• 1.2mm wire (16awg) 1 x 4" (10cm).
• 0.7mm wire (21 awg) 1 x 6" (15cm).
• 0.25mm weaving wire (30g) 24" (61cm).
• Front drilled stone, as shown in the video. The hold needs to be large enough to fit 2 base wires through.
• Jump ring, 8mm outside measurement (or what ever size you have handy).

I no longer put links to tools on here.
The tools I use are:
• Tronex needle nose pliers
• Tronex short round nose pliers
• Tronex razor flush cutters
• Prestige flat-nose nylon jaw pliers
• Beadsmith bail pliers
• Occasionally I use tronex bent nose pliers
• Occasionally I use heavy-duty wire cutters
• Occasionally I use xuron needle nose pliers
• Bobeeze bobbins (medium size, 25mm with no extra weights)

If you would like to support me,
My Patreon is   / kellyjjewellery  
My Etsy shop - https://www.kellyjjewellery.etsy.com
My website - https://kellyjjewellery.com
My Facebook -   / kellyjjewellery  
My Instagram - kellyjjewellery

My oxidising videos;
   • Oxidising with Kel.  
   • Oxidising With Kelly Jones Jewellery #Shorts  
   • Oxidising copper jewellery and after care.  

My latest weaving tutorial is here;
My website... https://kellyjjewellery.com/b/PXez9
Etsy... https://kellyjjewellery.etsy.com/list...

Thanks for watching :)

Music is written, recorded and played by Noelle Swift. Thank you Noelle, and to your band Bloody Bouque.

©2025 Kelly Jones Jewellery - All Rights Reserved

Please do not copy or share this content!
This content is created for me (Kelly Jones Jewellery) to promote my tutorials.
Do not share or reproduce this tutorial in any format.
Thank you!