Setting up a wireless HP printer using HP Smart in macOS

Описание: HP Printer setup support presents How to Set Up a Wireless HP Printer Using HP Smart in macOS _ HP Printers _ HP

If you have an HP printer and a Mac, you can use the HP Smart app to set up your printer wirelessly. This app makes it easy to connect your printer to your home Wi-Fi network and start printing. Follow these steps to set up your HP printer using HP Smart on macOS.
Connect and set up a printer in macOS
Set up your printer when it is on the same Wi-Fi network as your Mac or with a USB cable without installing any additional drivers.
Your printer might already be set up if it is on the network or USB-connected. In the app you are printing from, click File Print. If your printer is listed, it is ready to use. If it is not listed, click the Printer menu and select it from the Nearby Printers list, or select Printers & Scanners preferences or Printers & Scanners Settings to add it.
If your printer is not available, continue with these steps.
● For a USB connection or if your printer does not support AirPrint, use Spotlight to search for and open Software Update. Make sure the Mac is up to date, or install any new available software.
● Connect the printer to the same network that the Mac is connected to, or use a direct USB connection.
● Wi-Fi connection for printers with a touchscreen control panel: Open the Setup, Network, or Wireless settings menu, select Wireless Setup Wizard, and then follow the instructions to select the network name and enter the password.
● Wi-Fi connection for most printers without a touchscreen control panel: Press and hold the Wireless button for five seconds or until the wireless light starts to flash. Within two minutes, press and hold the WPS (Wi-Fi Protected Setup) button on the router until the connection process begins. The printer wireless light stops flashing when the connection completes.
● Wi-Fi connection for HP DeskJet 6000 and 6400, ENVY 6000 and 6400, and Tango printers: Press and hold the Wi-Fi button and the Power button on the back of the printer for five seconds until the blue bar flashes. Within two minutes, press and hold the WPS button on the router until the connection process begins. The blue bar stops flashing when the connection completes.
● Wired (Ethernet) network connection: Connect the network cable to the printer Ethernet port and to an available port on the router or access point. At the printer port, the green light should be steady and the orange activity light should blink.
● USB connection: Connect the cable to the USB port on the rear of the printer and to a port on the Mac. Install any new software, if prompted.
● Click the Spotlight icon , and then search for and open Printers & Scanners.
● If your printer is not listed, click Add Printer, Scanner, or Fax or the Add button , and then follow the instructions to complete the setup.
Additional print driver options might be available at HP Software and Driver Downloads.
Thanks For Watching.