How to Replace Front Catalytic Converter 2013-2019 Ford Escape

Описание: Buy Now!
New Catalytic Converter from 1AAuto.com https://trq.video/ic-1ACCD00443

This video shows you how to install an exhaust pipe with catalytic converter on your 2013-2019 Ford Escape. Catalytic converters are an important part of a clean emissions system on your car or truck. Over time, they can wear out, break down, or become clogged, causing poor performance, and extra pollution.

This repair was done on a 2014 Ford Escape SE 1.6L Sport Utility 4-Door AWD Automatic and the process should be similar on the following vehicles:
2013 Ford Escape
2014 Ford Escape
2015 Ford Escape
2016 Ford Escape
2017 Ford Escape
2018 Ford Escape
2019 Ford Escape

Tools you will need:
• Pry Bar https://trq.video/oG2-1AXAA00020
• 15mm Wrench https://trq.video/oJC-1AXAA00010
• 18mm Wrench
• 22mm Wrench
• 10mm Socket https://trq.video/oaIj-1AXAA00017
• 13mm Socket https://trq.video/oaYp-1AXAA00015
• 15mm Socket https://trq.video/oaYp-1AXAA00015
• 19mm Socket
• 32mm Socket https://trq.video/obJ-1AAST00003
• 7mm Socket https://trq.video/oaIj-1AXAA00017
• 8mm Socket https://trq.video/oaIj-1AXAA00017
• Angle Grinder
• O2 Sensor Socket
• Pliers
• E8 Inverted Torx Socket
• T25 Torx Driver
• T45 Driver
• Ratchet https://trq.video/obcf-1AXAA00016
• Socket Extensions https://trq.video/oaYp-1AXAA00015
• Swivel
• Torque Wrench https://trq.video/oais-1AXAA00044
• Anti-Seize Grease
• Brake Parts Cleaner
• Bungee Cord
• Liquid Thread Locker
• sanding disc
• Transmission Fluid
• Bucket
• Center Punch https://trq.video/ojI-1AXAA00055
• Drain Pan
• Floor Jack https://trq.video/oNB-1AXAA00068
• Funnel
• Hammer
• Jack Stands https://trq.video/oKt-1AXAA00065
• Pick https://trq.video/oCD-1AXAA00037
• Rubber Mallet
• Wire Brush https://trq.video/opk-1AXAA00079

Subscribe:    / @trq  

Check out our playlist:
Ford Escape 3rd Generation 2013-2019:    • Ford Escape 3rd Generation 2013-2019  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.