Rusty Giant Lock Restoration

Описание: Rusty Giant Lock Restoration
In this video I restore an giant lock. This lock belongs to my friend. He asked me to restore this lock. I was surprised to see the size of the lock. I hope you have never seen such a lock. On this lock there is a picture of King Shah Jahan.

I began the restoration work by disassembling all parts of the lock.I used vinegar to remove the rust from the lock parts. It can take a long time to remove rust with vinegar, so I added electricity. Then after 12 hours I removed all the lock parts from the vinegar and washed them. A lot of the rust was gone.After that cleaned all the parts with a wire brush. After that I started working on the front part of the lock. On the front side of this plate I sanded with a 120 grit angel grinder and then started hand sanding, 220, 320, 400, 600 & 1000 grit. After that, the plate was buffed and cold bluing was done on the back side of the plate.After that I started working on the back side of the lock. The back side of the lock was not welded properly. I repaired the welding. Apply the cold bluing the back side of the lock. Had quite a few dents on the hanging parts of the lock, filled them and hand sanded and buffed them.The key to the lock was not neatly made either. Repaired and buffed the key.Screws were used instead of revits to attach the lock which was not correct.So I made five new rivets. After restoring all the parts, assembled the lock.

Work I do in the video and what I use . If you want to ask any question, please ask in the comment section. I read everyone's comments and try to answer.

Subscribe for more of my content. I'm uploading videos about Restoration.

Thanks for reading the description and thanks for watching

#antiquelock
#restoration
#restorationvideos
#lockrestoration
#vintage
#rescue
#asmr
#restore
#antique
#repair
#ayazrestoration