Video of How To Clean A7K Ozone Plates and Extend the Life of Your Plates
Автор: A2Z Ozone Inc.
Загружено: 2018-06-29
Просмотров: 10597
Описание:
Watch this video to clean ozone generator plates in A2Z Ozone's A7K Ozone Generator. Doing this regularly will extend the life of your ozone generator by oxidizing material that could be stuck on the ozone plate. The A7K Ozone Generator has two ozone plates. One ozone plate is 3500 mg/hour. If you use both ozone plates, it makes 7000 mg/hour as tested with oxygen output.
Cleaning A7K Ozone Generator plates will extend the life of the ozonator
1. Remove the screws on the outside of the ozonizer
a. Older A7K Ozone Generators will have 7 screws
b. Newer ozone generators will have 6 screws
2. Place the screws in a safe location
3. Remove the outside cover of the ozonator
4. Use a razor blade to scrape oxidized material from the ozone plates
a. We recommend using a flat straight razor blade for best results
5. Be sure to not hit where the ozone plates are soldered together
6. If the soldered is fractured, the ozone plate will need to be replaced
7. Scrape across the grid lines on the ozone plate
8. Be sure to scrape the ozone plate evenly
9. Clean oxidized materials from the razor blade as needed
10. Repeat this process until the metallic finish of the ozone plate returns
11. Use a paper towel or blow across the ozone plates to remove oxidized material that could be left
12. Replace the outside cover to the A7K Ozone Generator
13. Place screws back into the A7K Ozone Generator
14. Connect the power cord to test that the ozonator is still working properly
15. There should be a purple glow coming off the ozone plates
16. Cleaning the ozone plates will limit spotting and should emit a steady purple glow as a result of producing ozone
Check out the A7K here: https://www.a2zozone.com/collections/...
Повторяем попытку...
Доступные форматы для скачивания:
Скачать видео
-
Информация по загрузке: