How to Replace Front Upper Ball Joint 1999-2007 Chevy Silverado

Описание: Buy Now!
New Ball Joint from 1AAuto.com https://trq.video/ia-1ASBJ00117
New Ball Joint Set from 1AAuto.com https://trq.video/ib-1ASFK00649

Modern suspensions combine a number of moving parts for safe and stable handling. The ball joint is the crucial moving component that ties those parts together. The ball-in-socket joint can wear out and loosen over time. Or, the rubber protective boot can tear, allowing contaminants to seize the joint. Bad ball joints are a common failure point on vehicle inspections because they lead to unsafe driving conditions. Fortunately, they are relatively easy to replace with the right know-how. This video shows you how to install new, quality TRQ ball joints on your 1999-2007 Chevy Silverado.

• Check here for more videos on the 1999-2007 Chevy Silverado:    • Chevy Silverado 1999-2006 1st Gen  

This repair was done on a 2004 Chevrolet Silverado 1500 LT 5.3L and the process should be similar on the following vehicles:
1999 Chevrolet Silverado 1500
2000 Chevrolet Silverado 1500
2001 Chevrolet Silverado 1500
2002 Chevrolet Silverado 1500
2003 Chevrolet Silverado 1500
2004 Chevrolet Silverado 1500
2005 Chevrolet Silverado 1500
2006 Chevrolet Silverado 1500

Tools you will need:
• Pocket Screwdriver
• Pry Bar https://trq.video/ozC-1AXAA00020
• 10mm Socket
• Ball Joint Press
• Pickle Fork
• Pliers
• Torque Wrench https://trq.video/o29-1AXAA00044
• Gloves https://trq.video/ooy-1AXSS00048
• Safety Glasses
• Floor Jack
• Hammer
• Wheel Chocks

Subscribe:    / @trq  

Check out our playlist:
Chevy Silverado 1999-2006 1st Gen:    • Chevy Silverado 1999-2006 1st Gen  

📱 Download the TRQ Auto Repair App for more videos, torque specifications, and car repair information: https://trq.video/appdownloadyt

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.