Gemini Slider 122 sliding gate motor installation in Vanderbijlpark Gauteng by Pottie 083 778 2288

Описание: Gemini Slider 122 Sliding gate motor installation by Pottie in Vanderbijlpark.
Call Pottie now to install your Gemini Slider sliding gate motor for you in Gauteng.
Pottie has 20 years experience in the installations, repairs, maintenance, troubleshooting and fault finding on all makes of sliding gate motor systems.

Gemini is a well known sliding gate motor, which is manufactured in South Africa by DMI Engineering in Silwerton Pretoria.

The Gemini Slider sliding gate motor is a 12 volt DC battery operated gate motor. It is normally referred to as the Gemini 122 model.
The gate motor battery can be upgraded to a 12 volt 12 amp battery.
The Gemini slider sliding gate motor is not Lithium battery ready.
Gemini Slider sliding gate motor parts are freely available throughout Gauteng.
So repairing your Gemini Slider sliding gate motor is simple and quick.

This Gemini slider sliding gate motor was supplied by the client.
Pottie just fitted the Gemini slider sliding gate motor for the client.

A older Duraslide gate motor was present, and non operational.
The old sliding gate motor was removed and a steel platform was created to allow for the new Gemini sliding gate motor to be installed.
the steel platform was made of 30x30x5mm angle iron and it was further strengthened by using 5x50mm steel flat bar.
The steel platform is level in all directions. This allows for the easy fitment of the Gemini sliding gate motor.

the steel gate present is a palisade type which is nearly 4x meters long.
Steel palisade gates are know to be skew like a banana.

Razz Rack is installed on light steel sliding gates which move easily.
Razz rack can not be manipulated as steel gate rack.
Thus the sliding gate was removed and straightened by standing on it.
The steel sliding gate was refitted and then only was the Gemini slider sliding gate motor welded down level in all directions.
Thus the gate motor was standing proud and elegant.
The Gemini sliding gate motor was also parallel with the steel sliding gate.
Steel angle brackets were also welded over the securing bolts, which means the gate motor cannot be unbolted and stolen, one will need to cut the steel angle brackets, before one can remove the gate motor completely from its steel base plate.
The plastic Razz Rack was welded onto the steel sliding gate and steel brackets were used as spacers between the Razz Rack and steel sliding gate.
This allowed for the Razz Rack to fill the whole gate motor pinion gear.
Plastic Razz Rack is known to break easily when installations are poorly conducted.
The gate motor gearbox was then filled with the factory supplied oil which is a 20w50 oil.
Power was connected to the gate motor power supply.
the battery charging voltage was checked and found to be correct.
The gate motor battery was then connected.
The Gemini gate motor was then placed in gear.
The test button was pressed and the gate motor started to run through its learn cycle.
The gate motor was then tested and found to be working properly.
The gate motor cover was fitted and secured with the 2x 8mm steel bolts.
The client was informed, how the gate motor is placed onto manual and back into gear.

Client was advised to obtain a Gemini anti tamper bracket to prevent a quick theft of the gate motor parts.

for all your sliding gate motor needs, just Call Amanda on 083 719 2250
We supply and install Gemini sliding gate motors in Gauteng.
All parts used to repair Gemini sliding gate motors are original.
We also supply and install all types of Centurion Sliding gate motor systems.
The Centurion D5 Smart Evo, Centurion D6 Smart, Centurion D10 Smart are all good sliding gate motors.

For more information, please look here:
https://www.exquisitesecurity.co.za/c...

other information is available here:
https://www.exquisitesecurity.co.za/i...