Stigma Prodigy Tattoo Machine Demonstration Video

Описание: Stigma Prodigy Demonstration Video Presented By National Tattoo Supply, Inc.
www.nationaltattoo.com

Transcript:

This is the National Tattoo video on the Stigma Rotary Prodigy. The Prodigy is an infinitely adjustable machine from super soft to super hard hitting just by turning the thumb screw on top of the machine. The Prodigy comes standard with the 4.5 watt motor plug with an RCA plug in it and a medium Excenter. It can also be powered by the super powerful 10 watt motor plug that can be purchased separately through National. It also can use any of the four excenters. The short excenter is 2.6-3.6mm, the medium is 3.5-4.5mm, that is what comes standard on the machine. The long is a 4.4-5.5mm and the adjustable is a 2.5-6mm, which also can be purchased separately through National. The motorplugs and the excenters can be changed in seconds. Now, to help avoid cross-contamination, the motorplug can be bagged separately or the entire machine all together at once. The machine bodies are machined from a solid block of aircraft aluminum and are fully autoclavable. They are anodized in an assortment of colors. The Prodigy features also a needle bar stabilizing system so no rubber bands are needed. It accepts all standard 5 5/8" length needle bars and tubes. The machine head weighs only 1.4 oz. or 2.9 oz. with the motor plug attached. There is also a clipcord upgrade kit available for purchase separately through National. We carry all the motorplugs and the excenters and every accessory part for Stigma machines.
Now I'd like to touch on, this is the adjustment screw I was talking about. So I'm going to touch on a few things here. I'm going to add here I have a 4 flat needle bar with a tube, tip and grip. I'm going to place this into the machine. Now I will also, when I have this in place, I will touch on, in case you don't own a Stigma or know anybody who does, this is the needle bar stabilizing system. A very ingenious system, you just set that the way you want to keep your needle bar where you want it. I'll set my points to the end of the tip. Now I'll run the machine for you and show you some of the adjustment. This is roughly 6.5 volts. Now I will tune the machine. We'll go back the other way, let you hear the difference. This is without changing voltage at all. This is quite an ingenious design. You can hear the difference in running. And also, just for anyone who doesn't own one, this is the easy plug motor system. Like I said, this comes with the 4.5 watt motor. We also have a 10 watt motor and the excenters are changeable in seconds. The whole thing can be disassembled and reassembled and ready to go in a matter of seconds.