How to Replace Intake Camshaft Position Sensor 2015-2020 Ford F-150 3.5L V6

Описание: Buy Now!
New Camshaft Position Sensor from 1AAuto.com https://trq.video/ic-1ACPS00129

This video shows you how to install a new (intake/exhaust) camshaft position sensor in your 2015-2020 Ford F-150 3.5L V6. For vehicles with electronically controlled timing, a camshaft position sensor relays important information to the computer to ensure the engine is running properly. A bad sensor may relay incorrect or no information, resulting in poor running conditions and trouble codes.

This repair was done on a 2015 Ford F-150 XLT 3.5L Crew Cab Pickup 4-Door 4WD Automatic and the process should be similar on the following vehicles:
2015 Ford F-150
2016 Ford F-150
2017 Ford F-150
2018 Ford F-150
2019 Ford F-150
2020 Ford F-150

Tools you will need:
• Flat Blade Screwdriver
• 21mm Socket
• 5.5mm Socket
• 8mm Socket
• Trim Tool Set https://trq.video/oaTr-1AXXX00006
• Ratchet
• Torque Wrench https://trq.video/obLV-1AXAA00044
• Dielectric Grease
• Gloves https://trq.video/ob9v-1AXSS00048
• Safety Glasses
• Floor Jack
• Jack Stands
• Wheel Chocks

Subscribe:    / @trq  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.