System 3000 High Temp Epoxy Resin

Описание: Click here to see this product & more on Fibreglast.com: http://bit.ly/1NcLgpl

Excellent for High Service Temp Parts & Tooling


For tooling and components that will operate in intermediate/high temperature service environments, use this High Temp Epoxy Resin. When post-cured, this unfilled, amber epoxy laminating resin system offers maximum stability in service applications involving frequent heating and cooling cycles. #3000/3045 High Temperature Epoxy Resin easily wets-out reinforcing fabric for quick, stable fabrications.

Cure using a ramp up cure schedule requiring at most 300°F
For maximum stability in any application, an oven post-cure is strongly recommended. This epoxy laminating system will gel hard in 18 to 24 hours at 77°F, but for applications where continuous service temperature is over 250°F, a post-cure is mandatory. Allow the High Temperature Epoxy Resin to gel at room temperature before initiating an oven post-cure.

#3000/3045 High Temp Epoxy Resin can be used with #1096 High Temp Epoxy Surface Coat. When used together, High Temp Epoxy Resin and High Temp Epoxy Surface Coat can create tough, durable, heat resistant tools.
Mix Ratio (by weight) -- 100:16
Pot Life @ 77°F -- 45-50 minutes
Color -- Amber
Maximum Service Temperature -- 270ºF
Post Cure Cycle
Ramp up temperature at a rate of no more than 2-5°F per minute.
Hold @ 150°F, 250°F, and 300°F for 3 hours each.
Ramp down temperature to 100°F at a rate of no more than 2-5°F per minute. Do not shut down the oven and leave to cool.