How to Replace Front Strut 2007-2010 Chrysler Sebring

Описание: Buy Now!
New Strut Assembly Set from 1AAuto.com https://trq.video/ia-1ASSP01287
New Strut Assembly from 1AAuto.com https://trq.video/ia-1ASTS01226
New Strut Assembly from 1AAuto.com https://trq.video/ia-1ASTS01227

This video shows you how to install front struts on your 2007-2010 Chrysler Sebring. TRQ Struts are made to fit your vehicle exactly, just like the original part. Struts can wear out as early as 50,000 miles. You should inspect them regularly for leaks or wear. Save time, money, and hassle by replacing an entire strut assembly.

This repair was done on a 2010 Chrysler Sebring Touring 2.4L Sedan 4-Door FWD and the process should be similar on the following vehicles:
2007 Chrysler Sebring
2008 Chrysler Sebring
2009 Chrysler Sebring
2010 Chrysler Sebring

Tools you will need:
• 21mm wrench
• 13mm Socket
• 15mm Socket
• 18mm Socket
• 19mm Socket
• 21mm Socket
• Strut Spring Compression Tool
• Trim Tool Set https://trq.video/oFB-1AXXX00006
• Locking Pliers
• Ratchet
• Socket Extensions
• Torque Wrench https://trq.video/oZA-1AXAA00044
• Copper Anti-Seize
• Hammer

Subscribe:    / @trq  

Check out our playlist:
Chrysler Sebring 2007-2010 3rd Generation:    • Chrysler Sebring 2007-2010 3rd Generation  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.