Member's Mark Pool Lounger Review and Assembly

Описание: This video is a product review and Assembly the following product:
Member's Mark (aka Sam's Club) Pool Lounger (White)
Shipped from the Step2 company 10010 Aurora - Hudson Rd. , Streetsboro, Ohio 44241
Also known as Step2 Vero Pool Lounger
Item # 990387225
https://www.samsclub.com/ip/Member-s-...
Retails for $200 at Sam's club, sometimes on sale for $179.
Single chaise lounger is safe for use in or out of a saltwater or chlorine pool up to 9 inches.
Quick to assemble with marine grade 316 stainless steel hardware that will not rust or corrode.
Ergoonomically designed for comfort.
Quick assembly including 24 LB sand compartment to stabilize chaise.
Supports up to 300 lbs.
24 IN W x 68 IN D x 29 IN H
I recommend watching this video before assembly:    • Step2 Vero Pool Lounger Assembly   Pay attention to step 3 around the 2:10 mark.

IMPORTANT! I know it is a long video. The most important parts would be Checking that you have all the hardware before assembly, understanding the details for Step 3, and filling with sand (water is not enough). Also, try to find the dryest sand possible. The stuff I had was damp which made filling it a very long process.

00:00 Intro
00:39 Unboxing
02:24 Step 1 - Install three threaded inserts
04:51 Step 2 - Connect two pieces using two bolts and washers
06:32 Step 3 - Install three screws between two pieces.
10:21 Step 4 & 5 filling sand explained but not implemented
11:06 Pool Test Fail
11:35 Initial thoughts
13:40 Check Hardware before assembly
14:10 Step 4 - Fill with sand.
15:51 Step 5 - Attach sand compartment to lounger
16:41 Water test