2010-2013 Mazdaspeed 3 WOT BOX Install!
Автор: Tom Canino
Загружено: 2020-04-29
Просмотров: 4049
Описание:
Wot Box N2MB Software (Windows only): http://www.npcompleteperformance.com/...
NOTE: Red and Orange are used as a bypass for power to stock coils. ONCE YOU DO THIS YOUR CAR WILL NOT WORK UNLESS THE WOT BOX IS PLUGGED IN OR YOU JUMP THESE WIRES!!!!!
Red: Ignition coil power to ECU (teal wire going to ecu "plug side")
Orange: Ignition coil power to COILS (same teal wire but on the COILS/CONNECTORS end)
Black: Ground (duh)
Green: Clutch wire input (solder to WHITE wire on the ECU. Bottom row, first wire on the RIGHT)
Blue: Accelerator Pedal Position input (solder to ORANGE wire on the ECU. TOP row, 5th wire from the RIGHT)
Yellow: RPM input (solder to WHITE wire on the Left ECU harness, 3rd row DOWN, 6th wire from the RIGHT) This one is the biggest pain because its tucked in the middle of everything
Pretty straightforward install, but definitely something that may stress you out seeing that you're playing around the ECU harness wires. Just take your time and you'll be fine. This took me a couple hours because I had to run to the hardware store. Next I will be going over how to wire your SSC for Additional Fueling!
Повторяем попытку...
Доступные форматы для скачивания:
Скачать видео
-
Информация по загрузке:
