Chromagen Hot water system DIY Anode replacement
Автор: mikeycbd
Загружено: 2024-10-24
Просмотров: 1354
Описание:
Tools that you need after you have your new anode.
Philips Screwdriver
27mm Socket
330mm extension rod
Impact wrench 3/4" (3 quarters of an inch) 800W (My one was)
10mm hex key
Turn off the power 1-2 days before. have your last shower/use the last of the hot water.
Turn off the water supply.
Drain the water, wash out as necessary.
remove the lid (one screw)
remove 4 screws and slide the front forward and off gently, there are 2 cables for the control panel.
remove 2 screws on the plastic cap to the metal rod.
Using the impact wrench (L) undo the rod.
Replace rod after flushing out the tank (as necessary)
Do up the outlets 10mm hex brass washer/cap
reassemble
I can't remember what the book says but I would recommend changing the rod at least every 2 years. Heavy usage would make more of the magnesium come away and you don't want the rod to break.
Thanks to S&S Tool hire in Morwell Victoria for the hire of the impact wrench. $55. Anode = $90 plus postage direct from Chromagen Ebay.
Live and work in Victoria, near Moe Vic 3825.
Повторяем попытку...
Доступные форматы для скачивания:
Скачать видео
-
Информация по загрузке:
