Rare Monty FM Receiver Board for ₹100! : Sony CXA1019S IC Vintage FM Kit Unboxing! | RoyTechJourney

Описание: Vintage Analog FM Receiver Circuit: Sony CXA1019S IC – The Ultimate Budget Gem from the 90s!
Discover the magic of retro electronics with this ultra-rare analog FM receiver circuit board featuring the legendary Sony CXA1019S IC! Back in the 90s, this one-chip FM/AM radio IC was an absolute favorite among DIY hobbyists, radio enthusiasts, and cassette tape recorder builders – powering countless homemade FM radios with its simple, high-quality performance. Designed by Sony Corporation as a bipolar silicon monolithic IC for radio-cassette players and headphone stereos, the CXA1019S packs everything you need into a single chip: RF amplifier, mixer, local oscillator, IF amplifier, quadrature detector for FM demodulation, tuning LED driver, electronic volume control, and even a built-in detector for crystal-clear audio output.c9714cd43898 It operates on a low 3-7V DC supply, draws just 5.3mA (typical at 3V for FM mode), and delivers a punchy 500mW output into an 8Ω speaker – making it perfect for portable projects without draining batteries.99ab0e
What makes this the most affordable analog FM circuit even today? Priced at just 100 INR (that's under $1.20 USD!), I snagged this elusive board from a hidden gem in the local electronics bazaar – a steal considering how scarce these have become. Once a staple in Indian and global DIY scenes, Sony discontinued production years ago, turning CXA1019S-based kits into collector's items. You won't find them on mainstream sites like Amazon or Flipkart anymore; they're relics of the pre-digital era, hunted by vintage audio fans and ham radio tinkerers. In this RoyTechJourney episode, I unbox, inspect, and test this rare find to see if it still tunes like a dream after decades in storage. Spoiler: It does – capturing FM signals with that warm, analog warmth no modern chip can replicate!
Key Features of the Sony CXA1019S FM Receiver Circuit:
All-in-One Design: Minimal external components needed – just a few capacitors, inductors, a variable tuning capacitor, and an antenna coil for a complete FM receiver setup.404d0f
FM/AM Dual Band: Focuses on FM (88-108 MHz) but supports AM too; ideal for simple radio builds.
Low Power & High Output: Runs efficiently on batteries; drives headphones or small speakers directly.
Tuning Simplicity: Built-in LED driver for signal strength indication – no fancy digital displays required.
Why It's Rare: Discontinued by Sony in the early 2000s, these boards now pop up only in old stock or second-hand markets, often fetching 500-1000 INR if you're lucky.
If you're into restoring vintage gadgets, building budget radios, or just chasing that nostalgic analog sound, this CXA1019S circuit is a must-have blueprint. Watch as I break it down step-by-step – from unboxing the board to firing it up with a quick power test. Got a similar retro find? Share in the comments!

Subscribe to RoyTechJourney for more deep dives into retro electronics, DIY hacks, and impossible bargains! Hit the bell for weekly uploads on vintage repairs, ESP32 projects, and solar trackers. What's your favorite 90s IC story?
#SonyCXA1019S #VintageFMRadio #AnalogFMReceiver #RareElectronics #RetroCircuitUnboxing #BudgetDIYRadio #RoyTechJourney #90sTech #FMRestoration
Parts List (For Replication):
Sony CXA1019S IC (core chip)
10.7 MHz FM IF Transformer/Coil
Variable Capacitor (10-100pF for tuning)
Electrolytic Capacitors: 4.7µF, 0.02µF, etc.
Resistors: As per datasheet (e.g., 10kΩ for volume)
Antenna Wire
Resources: Full datasheet available here. Connect: Instagram

Topics covered:
✔ Vintage electronics / ESP / Solar / Satellite
✔ Practical repair or build process
✔ Real workshop experience

This channel focuses on:
• Retro radio & TV restoration
• ESP32, ESP8266, BW16 projects
• Solar panel & power systems
• Satellite dish & DTH tracking
• Class‑D amplifier builds

🔔 Subscribe for raw electronics projects and restorations.


#RoyTechJourney #Electronics #RetroTech