Create a LoRa node, part 5: Attach Arduino Uno to the LoRa module

Описание: This is part 5 in how to attach an Arduino Uno to the LoRa module.

In this video the following will be explained:
How to wire the Arduino Uno and the LoRa module using jumper wires.
How to register an application and device on The Things Network (https://www.thethingsnetwork.org/)
How to import the Arduino-LMIC library (https://github.com/matthijskooijman/a...) in the Arduino IDE.
What to modify in the Arduino-LMIC library config.h file.
Where to find the device address, network session key and application session key in The Things Network console.
What to modify in the ttn-abp sketch (http://www.mobilefish.com/download/lo...)
What data is broadcasted from the LoRa module to the Single Channel LoRa Gateway and how the message is displayed in The Things Network console.

All steps mentioned in this video can also be found in this tutorial:
http://www.mobilefish.com/developer/l...

The Arduino Uno and the LoRa module wiring schema:
http://www.mobilefish.com/images/deve...

The decoder payload function:
http://www.mobilefish.com/download/lo...

To create your own Single Channel LoRa Gateway watch the following videos in this playlist:
   • Dragino Lora shield, part 1  

Check out all my other videos in the series how to Create a LoRa node.
https://goo.gl/B8Xtkg

Subscribe to my YouTube channel
https://goo.gl/61NFzK

#mobilefish #lorawan #lora #productreviews #productreview #TheThingsNetwork