Replacing Both Brake Rotors on a 2011 Ninja 250

Описание: If you like these videos, and would like to see more, support the channel through PayPal or Patreon.
https://www.paypal.com/paypalme/MattG...
https://www.patreon.com/user?u=41261286

Email me directly: [email protected] or [email protected] (there are two n's).

Removing the Front Wheel: 2:02.
Removing the Front Rotor: 7:32.
The Best Deal on Rotors and Pads (Ebay): 11:00.
Installing the New Front Rotor: 12:43.
Installing the Front Wheel: 20:29.
Using a Beam Torque Wrench vs. a Digital Torque Wrench 27:55.
Removing the Rear Wheel: 33:20.
Removing the Cush Drive and the Coupling with the Sprocket: 41:22.
Removing the Rear Rotor: 42:37.
Installing the Rear Rotor: 44:13.
Installing the Cush Drive and Coupling with Sprocket: 49:45.
Installing the Rear Wheel: 51:34.

If you like these videos, and would like to see more, support the channel through PayPal or Patreon.
https://www.paypal.com/paypalme/MattG...
https://www.patreon.com/user?u=41261286

Email me directly: [email protected] or [email protected] (there are two n's).

Information about Brake Fluid: 00:00.
The Danger of Over Torquing Brake Pad Retaining Pins: 00:43.
Removing the Pistons Using Brake Fluid Pressure: 5:00.
Loosening the Brake Pad Retaining Pins: 5:56.
Removing the Brake Pad Retaining Pins: 7:55.
Removing the Caliper from the Motorcycle: 15:05.
Disassembling the Caliper: 18:42.
Removing the Brake Pads: 18:42.
Removing the Caliper Holder (i.e. the Holder Plate): 21:35.
Removing the Spring: 21:49.
Removing the Dust Boots: 22:34.
Removing the Bleed Valve: 23:31.
Removing the Pistons with Compressed Air: 24:43.
Removing the Seals: 27:52.
Cleaning the Caliper: 33:25.
Assembling the Caliper: 35:57.
Installing the Seals: 35:57.
Installing the Pistons: 40:57.
Making the Bleeding Process Easier: 42:59.
Installing the Bleed Valve: 45:30.
Installing the Dust Boots: 46:13.
Installing the Spring: 48:37.
Installing the Caliper Holder (i.e. Holder Plate) 49:48.
Installing the Brake Pads: 51:18.
Installing the Caliper on the Motorcycle: 55:10.
Installing the Banjo Bolt: 56:59.
Tightening the Brake Pad Retaining Pins: 59:01.