How to Replace Serpentine Belt Tensioner 2004-2009 Dodge Durango

Описание: Buy Now!
New Accessory Drive Belt Tensioner from 1AAuto.com https://trq.video/ib-1AEBT00141

The tensioner is a springed device that keeps the serpentine belt in your vehicle at the correct tension to keep it on the pulleys, without being so tight that it breaks. Eventually the tensioner may become worn, loose, or stuck, resulting in belts that squeak, slip, or fall off. This video shows you how to install a new TRQ tensioner pulley in your 2004-2009 Dodge Durango.

This repair was done on a 2006 Dodge Durango Limited 5.7L Sport Utility 4-Door Automatic and the process should be similar on the following vehicles:
2004 Dodge Durango
2005 Dodge Durango
2006 Dodge Durango
2007 Dodge Durango
2008 Dodge Durango
2009 Dodge Durango

Tools you will need:
• 13mm Wrench https://trq.video/oyH-1AXAA00010
• 10mm Socket https://trq.video/oafu-1AXAA00017
• 13mm Socket https://trq.video/oaqC-1AXAA00015
• 15mm Socket https://trq.video/oaqC-1AXAA00015
• 8mm Deep Socket
• 8mm Socket https://trq.video/oafu-1AXAA00017
• 3/8 Inch Drive Ratchet https://trq.video/oaqC-1AXAA00015
• Gloves https://trq.video/oni-1AXSS00048
• Safety Glasses

Subscribe:    / @trq  

Check out our playlist:
Dodge Durango 2004-2009:    • Dodge Durango 2004-2009  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.