SIRIUS XHS Data and Synchronisation Interfaces

Описание: SIRIUS XHS Open Data Interfaces and Standard Protocols. SIRIUS XHS has two ways of transmitting the data to the PC:

1) Ethernet interface (GLAN) is intended for distributed data acquisition

2) USB 3.0 (Type C connector) is intended for very high-speed transmission.

The system is acquiring the data with a very low CPU load. It is using DMA transfer on the system level to reduce loads.

In today’s world of open toolchain and intercommunication, devices should be compliant with standard protocols. SIRIUS XHS can serve acquired data via these standard protocols, all in parallel.

1) OPC UA: Is the industry standard. Actually, it is more than a standard, it is a perfect framework where the device can be described and set up in any system, including SCADA, MES, ERP, mobile devices, and others.

2) XCP: Starting with version 1.4., XCP became a very powerful interface protocol in the automotive industry for data exchange. In the modern age of e-mobility, the required sampling rates are much higher than ever and 1 GBIT XCP interface allows data transfers with as high as 5 Ms/sec.

3) CAN and CAN FD: Vehicle bus systems can be read through the CAN FD interface while the measured data can be also transmitted through this “golden” standard protocol.

For more information visit https://dewesoft.com/products/daq-sys...