🚲 Custom 3000W BMX E-Bike [45MPH!] - Part 6 - Final Build! Finishing Touches, Speed Run, Test Ride!

Описание: Building an insane (stupid!) custom DIY 3000W [3KW!] 45MPH BMX ebike! In part 6 we finally finish the entire build. We do have a few small things to finish up, but after that I can take it on a speed run, test ride and show it off in all it's glory! This is only the 4th e-bike I have made so far and I'm still learning a lot so I'll show you all of the mistakes I made along the way.

I got the bag patches from this company: http://www.mutinyshop.com/ - not sponsored, I just like their service.

Fortunately this build went quite a bit smoother than the digi-camo ebike build.

------------------------------------------------------------------------------------------

⛧ \\ Table of Contents: \\ ⛧

00:00 - Intro
00:36 - Sewing patches
03:05 - Final assembly
06:30 - Finishing touches (decals)
06:34 - Printing and acrylic cutting
07:15 - Speed run!
08:36 - The completed build
14:49 - Next time / outro

------------------------------------------------------------------------------------------

⛧ \\ Insta:   / htll_official  
Please send me memes and anything cyberpunk/tech/dystopian related

⛧ \\ Music:
1. XYFΞRΞX - NΞW AMBIANCΞ -    • XYFΞRΞX - NEW AMBIANCE  
2. XYFΞRΞX - RΞPLICANT [2] -    • XYFΞRΞX - RΞPLICANT [2]  

⛧ \\ Merch: https://shop.spreadshirt.com/indstrkt
Please only buy something if you really like the designs! If you do grab something, please email me a pic of you wearing it, dm me, or tag me so I can check it out!

⛧ \\ Patreon:   / htll  
Please only donate if you have the means, if you don't - the best way you can help is to like, comment and share
Any amount you contribute will be poured back into the channel to bring you better content!

⛧ \\ Donate
BTC: 3QHZ4z7UuryXuVkMH3NtVTKrBrwyqtyiPD
ETH: 0xF7f848410960DC2C220555d5a70E3505fB4f271F
USDT (ERC20): 0xd6e40aa8b2ff210097b5abe960fd57a51fd96b46

------------------------------------------------------------------------------------------

\\ BMX E-Bike [4.0] \\

I wasn't really planning on making another ebike so quickly, but my coworker gave me this BMX bike so I figured I could turn it into a grocery getter to save from having to drive my car to the local store. I also wasn't planning on spending so much time on this build, but every time this happens I keep improving small things until the entire project has taken up so much time!

BMX bikes will always have a soft spot in my heart, growing up as a very young kid I used to rent "RAD" on VHS all the time, with 12 year old dreams of taking a young Aunt Becky to the prom where we would do freestyle tricks in the gym while 'Send Me An Angel' (   • Real Life - Send Me An Angel '89  ) blasted over the PA - if you didn't grow up in the 80's you're sorely missing out!

This definitely isn't a guide, maybe something more to inspire you to create your own. However I will be making 'how to' and 'how to do' tutorials on how to make an ebike from start to finish in future videos.

\\ Parts \\

1. The frame
This is actually a cheap Walmart BMX bike, it only costs about $90-100 and it's actually not that bad at all. It has a cool front brake system that allows you to turn the bars all the way around without twisting up the brake cables! Nothing special here really, just a traditional steel frame.

2. The motor
I got this kit off AliExpress, it's a 72V 2000W motor kit. I really wanted an LCD display and the controller this kit came with did not have a display, so I asked the seller if I could get one that did have it, and they said they would make me a custom kit with a different (more powerful) controller that had a display. It did cost a little bit more, but it is totally worth it to me.

3. The controller
This is an upgraded 50A controller with a LCD (IPS) display, I believe the controller that came with this kit is only 30A or 40A, using this 50A controller pushes the output to a whopping 3500W!!!

4. The battery
I found this battery pack on eBay, I thought the packaging was the perfect dimensions for this frame as there is not a whole lot of room for almost any components given how tiny this frame is. I later realized that this 'pack' was actually just a series of 6 smaller packs, it does have 60A output, but had I know that this was configured this way, I probably would have went with a different pack as I did have to modify a lot of the wiring to make it cleaner and more robust.

⛧ \\ Full write-up with pics is on the main site: https://hightech-lowlife.github.io/pr...

------------------------------------------------------------------------------------------

⛧ 2021 High Tech \\ Low Life | - Cyberpunk - Projects - DIY - Art - Tech - Modding - ⛧