How to remove seized cross bar on a rotary cutter (bush / brush hog)
Автор: Eiken Acres
Загружено: 2020-08-24
Просмотров: 14122
Описание:
Removing a cross bar that holds the rotary cutter blades off the vertical spindle or bottom gear shaft. This is a Woods M5 Dixie Cutter rotary cutter (Brush hog, Bush hog, Brush cutter, etc). This particular model had a cross bar that is pressed onto to the vertical shaft coming out of the bottom of the gear box, and you have to get creative to remove it.
I noticed the replacement cross bars now have a split design on the top of the bar that has bolts to clamp it onto the vertical shaft so the bar itself is no longer pressed on.
Tools used:
4" steel square tubing that was a cutoff section of a commercial light pole that you would find in a parking lot.
Harbor Freight 12 ton bottle Jack
https://www.harborfreight.com/12-ton-...
Harbor Freight log chain
https://www.harborfreight.com/3-8-eig...
Deep well impact socket that is just slightly smaller than the shaft size, so it doesn't get pressed into the cross bar and get stuck.
Повторяем попытку...
Доступные форматы для скачивания:
Скачать видео
-
Информация по загрузке:
