Feed Issue FANUC | Change unit of feed mm/Min | mm/rev | Feed Showing Wrong | Parameter for Feedrate

Описание: ⚙️ In this video, we explain the Feed Display Issue in Fanuc CNC when the feedrate is shown in the wrong unit.

By default, Fanuc controllers display feedrate in mm/min (G94). However, many programmers and machinists prefer to see the feed in mm/rev (G95) for clarity during turning operations.

📌 Important Note:
✔️ The feedrate is programmed correctly (in mm/rev or mm/min as per your G-code).
✔️ This issue is only about the display unit on the screen, not the actual machining feed.
✔️ By changing a Fanuc parameter setting, you can switch the feed display between mm/min ↔ mm/rev for exact monitoring.

✨ In this tutorial, you will learn:
➡️ Why feed shows incorrectly in mm/min by default
➡️ How to change display unit from mm/min to mm/rev in Fanuc CNC
➡️ Correct parameter setting for feedrate display
➡️ Practical tips for avoiding confusion during CNC operation

👉 Watch till the end to clearly understand how to set the correct feed display unit in your Fanuc CNC machine.

#FanucCNC #Feedrate #CNCProgramming #CNCTraining #FanucParameter


---

Fanuc CNC feed display unit problem
Feedrate shows wrong in Fanuc CNC
Change feed display mm/min to mm/rev
Fanuc CNC parameter for feed display
Feedrate unit setting Fanuc controller
Fanuc CNC G94 G95 feed explanation
How to set feed display in Fanuc CNC
Fanuc CNC feedrate parameter tutorial
Feed display mismatch Fanuc CNC
Fanuc CNC operator training feed unit
Fanuc CNC visual feed setting mm/rev
Feed unit confusion in Fanuc controller
Fanuc CNC machining feed display setting
Fanuc parameter setting for feed display
Fanuc CNC feed monitoring tips

----

#FanucCNC
#CNCProgramming
#Feedrate
#CNCTraining
#FanucTutorial
#FanucParameter
#CNCFeedUnit
#MachineShop
#CNCOperation
#CNCMachining
#FanucController
#CNCForBeginners
#G94
#G95
#FeedDisplay


---