CAR Horn Modification/Upgrade (Do it Yourself)| KalikotTV by Mr Kalikot

Описание: Safety procedures:
1. Use the right tool for the job
2. Use PPE for protection
3. Always proceed with caution

If not experienced enough with the craft make enough research or just put a comment on my channel and I MR. KALIKOT will be glad to assist you.

01:17 Bumper disassembly

After removing the secure bolt under the wheel well, slightly lift the bumper then slightly pull the bumper side towards you, this prevents the bumper headlight clips from being torn or damaged.
Secure all the screws and mounting clips so that it will not be hard to find as were going to put back the bumper, and to make sure that all of the clips and screws will be put back complete and in right places.
Once the bumper has been removed secure the bumper assembly in a secure place so that it will not be damaged and to prevent unwanted scratches.

06:00. Electrical Assembly

make sure all electrical connections has been covered by electrical tapes for added insulation and to prevent short circuit or electrical issues.
Make sure all electrical connections has made good contacts or connection to every part of the circuit to make sure proper operation of the equipment.
Secure the horn assembly thus this might cause to loosen bolts because of vibrations caused by activation of the horn, for the horn assembly might be dislodged.
Make sure that excess wirings has been properly secured or harnessed, to prevent untoward electrical issues.

05:33 Mechanical Assembly

Secure bolts to fastened extended brackets in place.
Make sure that extension brackets has made good contact to the car body, to make good contact to ground as were using a body ground horn.

Please Like... Share... Subscribe...

Mr Kalikot

#1KalikotTV
#DIYCarHornUpgrade
#DIYCarHornReplacement
#ProperBumperDisassembly
#HondaJazz
#HondaJazzGE
#DIY
#Howto
#Carrepair
#HyundaiSantaFe
#SantaFe
#Hyundai
#Toyota
#Fortuner
#Honda
#Nissan
#Mistubishi
#Ford
#Suzuki
#KalikotTV
#MrKalikotTV
#MisterKalikotTV