How to Replace Inner Tie Rod 10-12 Ford Escape

Описание: Buy Now!
New Tie Rod Set from 1AAuto.com https://1aau.to/ia-1ASFK04458
New Tie Rod from 1AAuto.com https://1aau.to/ia-1ASTE00808

1A Auto shows you how to repair, install, fix, change or replace a broken, busted, bad, or damaged tie rod. This video is applicable to the 10, 11, 12, Ford Escape

This repair was done on a 2012 Ford Escape XLT 3.0L and the process should be similar on the following vehicles:
2008 Ford Escape
2009 Ford Escape
2010 Ford Escape
2011 Ford Escape
2012 Ford Escape

🔧 List of tools used:
• Pry Bar https://1aau.to/ovt-1AXAA00020
• 14mm Wrench
• 22mm Wrench
• 7mm Wrench
• 14mm Socket
• 18mm Socket
• Grease Gun
• Inner Tie Rod Removal Tool https://1aau.to/o7-1AXAA00438
• Plastic Fastener Remover
• Channel-Lock Pliers
• Hose Clamp Pliers https://1aau.to/ocu-1AXAA00076
• Needle nose pliers
• Needle nose pliers
• 1/2 Inch Breaker Bar
• Ratchet
• Torque Wrench https://1aau.to/oSn-1AXAA00044
• Liquid Thread Locker
• Rust Penetrant
• Hammer
• Pick https://1aau.to/osp-1AXAA00037

Subscribe:    / @1aauto  

Check out our playlist:
Ford Escape 2008-2012 2nd Gen:    • Ford Escape 2008-2012 2nd Gen  
Ford Auto Repair Videos:    • Ford Auto Repair Videos  

For More Info visit us at https://1aau.to/h-bzI

⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.