How to make a buffer 10X Stock Solution of TE Buffer, pH 8.0

Описание: Tris EDTA buffer is commonly used for nucleic acids to neutralize and stabilize the pH. Use to isolate, purify, and store DNA, cDNA, or RNA for cloning, qPCR, or gel electrophoresis. Here’s how to prepare a 10X TE stock solution that can easily be diluted 1:10 to make 1X TE buffer.

1. Weigh out 1.6g EDTA (0.01M) and 7.88g Tris-HCl or Trizma® Hydrochloride (0.1M).
2. Add 400 mL ultrapure Milli-Q ® H2O to a beaker with a stir bar.
3. Add Tris-HCl and EDTA, stirring until fully dissolved.
4. Use a calibrated pH meter to measure and adjust the buffer pH with HCl and NaOH to pH 8.0. Be sure to exercise caution when working with concentrated acids and bases.
5. Pour buffer into a volumetric flask and q.s. to a final volume of 500 mL with Milli-Q ® ultrapure H2O.
6. Mix well.
7. Label and store the 10X TE stock solution at room temperature or 4°C for 3 - 6 months.
8. Dilute 10X TE stock 1:10 to make fresh 1X TE working buffer for your assay. Also, you can autoclave or sterile filtered the buffer according to your lab and assay requirements.

EDTA: https://www.sigmaaldrich.com/US/en/pr...

Trizma® Hydrochloride: https://www.sigmaaldrich.com/US/en/pr...

HCl: https://www.sigmaaldrich.com/GB/en/pr...

NaOH: https://www.sigmaaldrich.com/GB/en/pr...

Milli-Q® Water Purification Systems: https://www.sigmaaldrich.com/GB/en/te...

Clumpy lumpy chemicals? Our Redi Dri™ packaging system keeps hygroscopic salts, buffers, and detergents dry and free-flowing. Redi-Dri limits the environmental effect that moisture can have on product quality.

Dump the clumps and try Redi-Dri: https://www.sigmaaldrich.com/redi-dri

Short on time? Ready-to-use buffers blends, including 10X TE buffer are pre-dosed, no need to pH, just add water to start your assay fast!

Accelerate your assay and give pHast pack™ a try: https://www.sigmaaldrich.com/phast-pack

10X Tris EDTA: https://www.sigmaaldrich.com/GB/en/pr...