How To Change CFMoto 300SS Oil & Filter

Описание: IMPORTANT:
-10W-40 Racing 4T (2L or 2Quarts needed)
-Wix 24944 or STP S6015 OILFILTER
-17mm for bolt on left side
-8mm for 3 bolts on right side

Directions:
1. Set up oil pan or have something so oil can flow without making a mess on your bike
2. Undo the large 17mm bolt on the left side of the bike, this is where the oil will drain from
3. Once oil is at a slow drip clean the area and put bolt and washer back in (not to tight but not to lose…it you want to be fancy Tightening torque: 18.4 ft-Ib (25 N•m))
4. Now on the other side of the bike (right side) unscrew with Allen wrench the bolt that is connecting the faring to the frame
5. Once you see where the oil filter will be located unscrew with a 8mm bolt the 3 bolts keeping in the filter
6. Once unscrewed move grey secondary holder by hand and pop out the case and oil filter (some oil may come out of this side as well)
7. Clean out old oil left in the base of the holder
8. Put the new oil on the o ring of your new filter as well as new oil on the spring of the case for the oil filter(a lot of words there sorry)
9. Feel around till you can push the oil filter in, o ring first, and push where it holds itself in (not hard but you will be able to tell while moving it around)
10. Now put case back on and put 3 bolts back on as well and make sure that 17mm from earlier is screwed in as well.
11. Unscrew black topper next to oil filter and look to see how much oil you need to put in (I put 1.3L-1.4L in this video)
12. Pour in your new oil as needed
13. To check your oil level is ok, stand the bike straight up and look to see where the oil is sitting through the eye glass, should be just under the hash closest to the top
14. Once full screw back in the black topper and screw back in the fairing
15. Finally resets the service
16. Turn on the bike and let it cycle

Hope this helped some of y’all, I wanted to make a quick and easy video that got straight to the point and I hope y’all enjoyed!!!! Have a blessed day y’all!