BMW R1300GS | Denali D3's | How to fit them if you already have the Hex Ezcan | No panels removed.

Описание: Installation of Denali's D3 spotlights onto the BMW R1300GS. The bike already has a Hex Ezcan fitted. The D3's get mounted onto Touratech crash bars and connected to the Hex with a splitter cable. No need to remove any panels and only x1 circuit of the Hex Ezcan was used.
NB You could use x2 extension cables to connect the Left and Right D3's to separate circuits of the EzCan if you want, in order to be able to have extra functionality with the D3's, but it means using 2 circuits. This way we only use x1 circuit. Enjoy...........oh and a big thanks to Air Commodore T.B

00:00 Introduction
00:35 Meet the bike and the D3's
02:59 A closer look at the D3's
04:21 The splitter cable
04:42 Change of man cave
08:43 Routing the splitter cable
09:11 Light pod cable routing
09:45 Securing the splitter and D3 cables
10:52 Running the splitter cable to the Hex Ezcan
12:09 Cut your ties
12:22 Install is complete
12:40 Put seats back
12:51 Words of wisdom
15:54 Test ride

The D3 lights were supplied by Nippy Norman's :
D3 lights
https://www.nippynormans.com/r1200r/d...
Splitter Cable:
https://www.nippynormans.com/spotligh...
Crash bar mounts
https://www.nippynormans.com/spotligh...


The BMW had been previously fitted with the following:
Crash bars
https://www.nippynormans.com/touratec...
Hex Ezcan
https://www.nippynormans.com/spotligh...
Split sound bomb
https://www.nippynormans.com/denali/d...


Any other info then have a look at :
Denali
https://denalielectronics.com