SuperStar Components Hope Hose 5mm Fitting Installation - Ebay Related.

Описание: This is just a video to help out people who have the Superstar Components fittings for Hose 5mm hose, only a few people but I didn't want to sell these items even in the limited quantity I have without some guidelines on how to fit them.

00:00 Intro
00:04 Remove your hoses from brake system
00:39 Keep original banjo, throw away copper washers
00:46 Removing the metal connectors from hoses
01:34 Cutting off original insert/olive
02:26 Re-round your hoses to make new fittings go on easier
02:52 Fitting lever end connector (Shroud, olive, insert, straight)
04:58 Lever compression fitting (235 degrees - 3/4 turn)
06:46 Banjo/caliper end connector (Shroud, olive, banjo)
08:37 Fitting hose to master cylinder (125 degree turn)
10:33 USE ORIGINAL HOPE STAINLESS STEEL BANJO BOLT
11:03 Tightening banjo compression fitting (450 degrees or 1 full turn + 1/4 turn)
12:43 Banjo Bolt 180 degree turn might be needed, whatever leaves the hose as straight as possible
13:45 All hail the stainless banjo bolt, 2 NEW, uncrushed washers and 8nm needed
15:59 All bled, no leaks
16:17 Issue with the Hope banjo fitting is it's not always parallel with the caliper
16:52 Close up of the copper washers
17:25 You will lose some length