How to Make Sure Whether Cap Top is Good or Not of APEX Digital Flatbed LED UV Printer

Описание: https://www.apex-jet.com/ is a professional manufacturer of APEX Digital LED UV Printer and Digital T-shirt Garment Printer for 17+ years.
Our UV6090 can print on any material directly: plastic, acrylic, ceramic, metal, slate, wood, glass and leather.
This video is the instruction for troubleshooting.

UV PRINTER TROUBLE SHOOTING
A1 REPLACE THE DAMPER
A2 EXCHANGE THE DAMPERS
A3 CLEAN THE PRINTER HEAD
A4 REPLACE THE CAP TOP
A5 REPLACE THE PRINTER HEAD
A6 REPLACE THE DAMPER CONNECTION
B1 CHECK WHETHER THE AIR LEAKAGE FROM THE CAP TOP IS HAPPEN OR NOT
B2 ADJUST THE CAP TOP POSITION
C1 REPLACE F9
D1 REPLACE F5
E1 CHECK THE ALL THE CHANNELS ARE OPENED OR NOT IN ENGINEER MODE
E2 REPLACE F7
E3 REPLACE THE PRINTER HEAD CABLE
E4 REPLACE THE PRINTER HEAD BOARD
E5 REPLACE THE MAINBOARD B
G1 CHECK WHETHER THE WIPER CAN CLEAN THE PRINTER HEAD OR NOT
H1 UNINSTALL THE DRIVER
H2 REPLACE THE ENCODER STRIP
H3 REPLACE THE ENCODER SENSOR
H4 REPLACE THE MAIN BOARD A
I1 CHECK IF THE DEVICE MANAGER IS CONNECTED OR NOT
I2 ADJUST THE CABLE CONNECTION
I3 CHECK THE HORIZON LIMIT SWTICH
I4 REPLACE THE HORIZON LIMIT SWTICH
J1 CLEAN THE ENCODER STRIP
K1 CHECK THE UV LED IS ON OR NOT IN ENGINEER MODE
K2 CHECK THE VOLTAGE OF THE UV LED
K3 CHECK THE CABLE OF THE UV LED
K4 REPLACE THE I BOARD
K5 REPLACE THE UV LED
K6 REPLACE THE CABLE OF THE UV LED
L1 CHECK THE VOLTAGE OF THE T BOARD
L2 REPLACE THE T BOARD
L3 UNPLUG ALL THE CONNECTION OF E BOARD, AND TEST THE POWER SUPPLY A
L4 CHECK ALL THE POWER ONE BY ONE
L5 REPLACE THE POWER SUPPLY A
M1 CHECK THE CONNECTION OF THE POWER
HOW TO TAKE OFF THE BACK COVER OF MACHINE
HOW TO TAKE OFF THE FRONT COVER OF MACHINE
HOW TO TAKE OFF THE UPPER COVER OF MACHINE