CATIA V5 Tutorial #35 | Hat Bracket (Sheet Metal) | Beginner

Описание: A CATIA V5 beginner tutorial on how to create a hat bracket (sheet metal). In this tutorial, we will be using the Generative Sheetmetal Design and Sketcher Workbenches to create the 3D CAD model. The version of CATIA used in this video is CATIA V5 R21; unless otherwise specified, all dimensions are in inches. The left click rings are red and the right click rings are yellow.

If this video was helpful, please click the "like" button and/or leave a comment, thanks for watching!

► Timestamps:
00:00:00 Start From Generative Sheetmetal & Create a Sketch
00:00:15 Specify the Sheet Metal Parameters
00:00:32 Create a Sketch for the First Wall
00:01:04 Exit the Sketch & Create a Wall
00:01:21 Wall On Edge Definition
00:02:05 Create a Sketch for the Holes
00:02:27 Apply and Adjust Constraints
00:04:31 Create a Cutout From the Sketch
00:04:56 Finish the Bracket With the Corner Command

► Part Volume:
Hat Bracket = 0.085433 in3

► Playlist for CATIA V5 Beginner Tutorials:
   • CATIA V5 Beginner Tutorials  

► Playlist for CATIA V5 Advanced Tutorials:
   • CATIA V5 Advanced Tutorials  

► Playlist for Mechanisms:
   • Mechanisms  



#catia #catiav5 #catiav5tutorials