Carbonfiber Skinning or Wrapping Tutorial - Ironman & Spiderman Mask

Описание: Facebook:   / mat2composites  
Twitter:   / matthieutje65  
Instagram:   / matthieulibeert  

Instructables written tutorial: http://www.instructables.com/id/Carbo...
_______________________________________________

In this extended video tutorial I'll explain you how you can skin any part you found around you with carbonfiber - carbon fiber (fibre).
By skinning parts you will add carbonfiber on top of your original part. By doing so you will add weight, but you will also add stiffness to your part. You can compare skinning parts with carbonfiber with flattening parts before paint with bondo. You add layer after layer and sand inbetween to get a high gloss finish at the end. In this tutorial all materials used are from easy composites. You can find their website down below, as well as direct links to the products you will need. They also did a skinning tutorial you can find on following link:    • How to cover parts in carbon fiber (fibre)...  

Step by step I'll go through the following in this video:
Chose your part
Sand and Clean your parts
Add a basecoat
Wrap or skin your part with dry carbonfiber
Vacuumbag
Add epoxy resin and sand
Clearcoat
Finish and final look

_______________________________________________

Instagram Legacy Props:   / legacyprops  
Facebook Legacy Props:   / legacyprops  
_______________________________________________

Website Easy Composites UK: http://www.easycomposites.co.uk
Facebook Easy Composites:   / easycomposites  

_______________________________________________

Products used and link to the product

Carbon Fibre 2/2 Twill 3k 199g 1m Wide
http://easycomposites.co.uk/products/...

Carbon Fibre 2/2 Twill 12k 450g 1m Wide
http://easycomposites.co.uk/products/...

Carbon Fibre 2/2 Twill 3k 210g 1m Wide Red (SIMILAR TO WHAT I'VE USED)
http://easycomposites.co.uk/products/...

EL2 Epoxy Laminating Resin 500g FAST
http://easycomposites.co.uk/products/...

Carbon Skinning Basecoat 500g Pack
http://easycomposites.co.uk/products/...

Translucent Tinting Pigments for Clear Casting Resin - 10 Colours
http://easycomposites.co.uk/products/...

19mm + 32mm Cutting Discs with Arbor
http://easycomposites.co.uk/products/...

Composites Vacuum Pump
http://easycomposites.co.uk/products/...

Through-Bag Connector
http://easycomposites.co.uk/products/...

Elastifilm Vacuum Bagging Film
http://easycomposites.co.uk/products/...

Vacuum Bagging Gum Sealant Tape (High Temp) 15m
http://easycomposites.co.uk/products/...

You can also find a starters kit for skinning!
Carbon Fibre Skinning Starter Kit - 2/2 Twill Carbon
http://easycomposites.co.uk/products/...