How to remove broken handle on pool filter backwash valve! (TUTORIAL)

Описание: Replacement valve Amazon How to remove backwash valve handle

Old style handle assembly:

Pentair 273241 Piston Rod Assembly Replacement 2-Inch PVC Slide valve

https://www.amazon.com/gp/search?ie=U...

New style: Pentair 263055 Piston Shaft Assembly Replacement Kit

https://www.amazon.com/gp/search?ie=U...
Steve gives you step-by-step instructions on how to easily fix any stuck push/pull backwash handle!

✅Visit our Website and be sure to check out more of our Amazon affiliate products.
https://www.aaapoolservice4u.com/amaz...

TIMESTAMPS:
0:10 - Introduction
0:55 - Tools needed
1:19 - Removal process

This is for quickly removing broken or stuck backwash valve handles
1. Turn pool equipment off at breaker
2. Remove drain plug to remove water from filter tank
3. Loosen union collars and separate filter from pipes
4. Move filter out of the way to allow access inside the valve
5. Using sharp cutter cut the rubber oring on piston
6. Using needle nose pliers grab rubber o-ring and pull it out while spinning the handle. If handle is broken, spray lubricant into the opening and pull one end of the cut o-ring
7. Repeat process for second o-ring
8. Pull handle out with no resistance.