1010EB Replace Motor Belt
Автор: RUNOW Fitness
Загружено: 2023-04-20
Просмотров: 287
Описание:
1, Turn off the power, and loosen the adjustment screws at the end of the treadmill counterclockwise to make the running belt in a slack state.
2, Unscrew the screws holding the motor, loosen the screws holding the front roller counterclockwise, and replace the motor belt.
3, Screw the screws that hold the motor, and slowly move the motor belt to make it reset.
4, Tighten the adjusting screws at the end of the treadmill clockwise and the screws holding the front roller, and tense the running belt. (Do not tense the running belt too tight)
5, Turn on the power, and run the treadmill, by adjusting the adjustment screws to run the belt center. (Refer to page 21.22 of the user manual)
Повторяем попытку...
Доступные форматы для скачивания:
Скачать видео
-
Информация по загрузке:
