Kingcraft Limited Super Stearman MAIDEN FLIGHT!! by HobbyKing 'BIG RED' Susan Dacy

Описание: Get one here: https://bit.ly/3lVYKfo
Radio I use: https://amzn.to/2ykFXUF
ISDT Battery Checker : https://bit.ly/3ow5ZgD or on Amazon https://amzn.to/34uRzFq
Receiver I use: https://amzn.to/3osePfa
Camera used: https://amzn.to/2GQCW2H
My Amazon store: https://www.amazon.com/shop/johnvhrc
Amazon links are affiliate links, free for you to use, but give me a tiny commission off the sale, to help fund my channel! Thank you!

Thanks GBLynden for shooting video! Sub his channel!

The Limited Edition Kingcraft Super Stearman is a beautifully finished and highly detailed scale model of this powerful aerobatic biplane. The Stearman is provided in an almost ready to fly format and with some specific assembly procedures to follow. Because of this, it is recommended for modelers with previous ARF assembly experience. Once built you will be rewarded with a stunning looking airplane that performs just like the full size when used with a 1200~1300W motor and 6S Lipoly battery. The detailing includes a realistic dummy engine, raised panels, authentic instrument panel, scale cockpit with pilot, detailed rigging, and dummy oleo struts, all this adds a touch of ultimate realism. Due to this being a "Limited Edition" there is only a certain number of kits available, so don't delay in acquiring one of these beautiful models to add to your collection.


Kingcraft has faithfully reproduced Susan Dacy's "Big Red" Super Stearman which is fitted with a fire-breathing supercharged 450hp Pratt and Whitney engine, this completely transformed its aerobatic capabilities over the original trainer version. The model is constructed mainly of balsa and plywood which is then finished in a high quality covering with most of the decals and trim pre-applied at the factory. Scale details such as the turtle deck, raised paneling, cowl, wheel pants, etc are made from either fiberglass sheet or fiberglass moldings. A very complete hardware pack is supplied which includes a polished aluminum spinner, main wheels, steerable tailwheel assembly, complete RC linkage set, nuts and bolts, and anything else necessary to complete the model. You will only require, glue, motor, ESC, battery, and RC equipment.


Due to the Stearman having a very short nose, a unique removable fiberglass battery tray has been designed to allow the battery to be installed as far forward as possible. This tray is held in place with a thumbscrew and removes the need for any extra ballast to obtain the correct C of G. To fit the aluminum spinner you will require a brushless motor with a reversed shaft, please see related products for the recommended Propdrive motor.


Features:
• Highly detailed accurate model of the Super Stearman
• Balsa, plywood, and composite construction
• Realistic dummy radial engine
• Airfoil shaped landing gear with dummy oleo struts
• Detailed cockpit with instrument panel and pre-painted pilot
• Unique battery tray to achieve the correct C of G without extra ballast
• Full hardware set included


Specs:
Top Wing Span: 1400mm (55.1")
Bottom Wing Span: 1383mm (54.4")
Total Wing Area: 59.43sq.dm (884.6sq.in)
Fuselage Length: 1110mm (43.7")
Flying Weight: 2700~2900g
No of RC Channels: 4 or more


Required (Not Supplied):
Motor: Propdrive V2 42-58 500KV with reversed shaft
ESC: 80A or greater
Propeller: 15x8
Battery: 6S 3800~4000mAh 30~50C or greater Lipoly
Servos (Rudder and Elevator): 2 x 3.5Kg/cm micro
Servos (Ailerons): 2 x 4Kg/cm standard


Note: A copy of the building manual is available under the "Files" tab and we highly recommend that you study this before starting assembly to fully understand the building process.

#kingcraft
#stearman
#hobbyking