Lathe rebuild Pt.1 - The bed, the saddle and the headstock

Описание: Hi everyone. In this video we'll go through part of the process of my lathe rebuild.

There might be a few things missing (like 'levelling' the bed before anything else), it was too much footage to squeeze in a short video.

Anyway, I hope this helps someone out there; at least you can look at some parts of the lathe that you couldn't otherwise without taking it apart.

Tools I use: https://www.nbrworks.com/tools/

Timestamps
00:00 The bed
02:43 The saddle
05:18 The headstock
06:30 New spindle bearings
08:33 Spindle runout
09:35 Electrics
10:03 Putting it back together
11:05 Running

Note: I'm not a professional and this is not a tutorial. This is just a careful reassembly with some improvements and compromises in order to have a working lathe in a short term. Be mindful of warranty loss if you choose to do this on a new machine.

Lathe: HBM 250x550 Profi Vario
Lathe rebuild playlist:    • HBM 250x550 lathe rebuild  

#lathe #diy #machining

Credits:
Scraping clip at 04:21 is from Abom79/Lance Baltzley's video:    • Scraping Basics with Lance Baltzley  
Music: Quincas Moreira | Bunny Hop

   • Lathe rebuild Pt.1 - The bed, the saddle a...