Hans - the 3D printed 5 button battery powered USB MIDI footswitch

Описание: Hi there. This is a video about Hans, a 3D printed footswitch.

You can learn more about Hans at the github here: https://github.com/hunked/hans

Hans sends MIDI notes on/off messages as well as control change/program change messages. I made Hans to work with the Synthstrom Deluge (which requires note on messages) but it will work with anything that takes any of the aforementioned MIDI messages over USB or a standard MIDI cable.

Hans is powered by an 18650 battery for true portability and I often use mine with my Deluge using only a MIDI cable for a connection.

Hans is totally customizeable. Change notes and velocities, CC numbers and values, PC numbers, channels, and various system settings all from the footswitch. As well - Hans is totally open source and I am updating the firmware as often as I find any bugs/think of any missing features. The firmware is easily updatable using the teensy loader (or full arduino software, if you so desire).

Again, check out the github for more details (link above).

If you'd like to buy a prebuilt Hans I occasionally have one for sale here:
https://github.com/hunked/hans/blob/m...

Cheers, thanks for watching.