3M™ Tech Tips: Damaged Panel Repair Process Episode 7: Mix and Apply Glaze

Описание: Tom Cornelius, 3M™ Application Engineer, goes through the 3M™ Standard Operating Procedure detailing how to perform a panel repair on a large, damaged area. In this video Tom applies glaze to the repair area, and shares his best practices, tips, and tricks.

Important notes
Always wear proper PPE: Safety glasses, protective gloves, respirator and anything else required for the job. This video is intended for a professional setting such as a body shop or paint shop. Make sure to check OEM recommendations for all adhesives to confirm you’re using the correct product for the job.

Tom’s tips and best practices (00:59)
Things to know when mixing glaze and hardener.

Mixing glaze filler and hardener (01:31)
Fold and flatten the filler to prevent air entrapment.

Apply glaze to the repair area (01:51)
Start with a tight coat, followed by a build coat.

For more tips and tricks on mixing glaze and hardener, check out our video Tech Tips: Mixing Hardener with Body Fillers and Glazes
   • Tech Tips: Mixing Hardener with Body Fille...  

Products used in this video
3M™ Platinum™ Plus Glaze https://www.3m.com/3M/en_US/p/d/b4006...

Please note: There are of course many factors and variables that can affect an individual repair, so the technician and repair facility need to evaluate each specific application and repair process, including relevant vehicle, part and OEM guidelines, and determine what is appropriate for that repair.

3M™ Standard Operating Procedures:
https://www.3m.com/3M/en_US/collision...

For more advanced tutorials, check out 3M™ Collision Repair Academy https://www.3m.com/3M/en_US/learning-...

Safety and warranty information https://www.3m.com/3M/en_US/collision...
Website: https://www.3MCollision.com
Instagram:   / 3mcollision  
Facebook:   / 3mcollision  
Twitter:   / 3mcollision