STUMPED? Q&A's from "Hollow Chisel Mortising with a Shopsmith Mark V", Why I HATE some Chisel & Bits

Описание: SHOP NOTES: In this episode of STUMPED? I'll answer the questions and respond to the comments from this weekend's video on mortising on the Shopsmith Mark V with the SS Hollow Chisel Mortising Kit. If you missed that video, catch it here:    • Hollow Chisel Mortising with a Shopsmith M...  

✅ Visit http://www.MyGrowthRings.com and join the conversation by becoming a FREE Channel Member! Details under "Explore Channel Membership".

0:00 - Intro
0:40 - You must sharpen the bits!
1:20 - Does the 5/8" leave come with the kit and can you demo the old SS Chisel & Bit?
2:41 - How about a cheater bar?
3:08 - Use a 2X4 to prevent table defection
3:41 - The Ol' Dime Trick
4:12 - How about mortising horizontally?
5:29 - Yes, the table doesn't have to slip!
5:41 - No, you aren't a weakling!
6:00 - Use two stock quill handles
6:15 - Can I recommend an aftermarket chisel and bit set?
9:34 - You'll find links in the video's "Show More" drop-down
10:39 - Is it crazy to buy the Shopsmith Universal Tool Rest?
11:40 - Is mortising on a Shopsmith too complicated?
11:52 - Mortising with an old Shopsmith Chisel and Bit
12:14 - Use a backer board
15:46 - Which way do you face the chip exhaust slot?
18:43 - Summary and final thoughts

LINKS to products that were used and discussed in this video (in no particular order):
🟢 Here’s an inexpensive set of cone=shaped diamond stones for the inside of the hollow chisels: https://amzn.to/2LnCoGT
🟢 Here’s the two-grit diamond stone for removing the burr and all-around sharpening: https://amzn.to/37hBvIF
🟢 Geoffrey Baker's "Quick Release Quill Feed Handle Kit" available through him via eBay http://ebay.us/CNEwKz
🟢 Here's the dry lube I used inside the chisel and on the flutes of the bit: https://amzn.to/3mdSqQA Works on tabletops and on your way tubes too.
🟢 Here's the mortising package from Shopsmith: https://www.shopsmith.com/ownersite/c...
🟢 Here's the Shopsmith mortising kit on eBay: http://ebay.us/aKfe1P
🟢 Here's a link to the handy magnetic base LED lights that washed-out the video! https://amzn.to/2GpseU7
🟢 Here's the 9" long 5/32" hex wrench that I prefer as my EDC "Shopsmith Toolbox" and at roughly $5, it's a KILLER DEAL! : https://amzn.to/3nr64kJ

🎬 Here's the video where I first installed the aftermarket quill feed handles:    • Upgrading the Shopsmith Quill Lever to a Q...  

🎬 Here's the link to Geoffrey's Youtube channel:    / @geoffreybaker  

🎬 Here's Nick's old Youtube channel with him doing the Ol' Dime Trick:    • "Setting Clearance on a Mortising Chisel"  

🎬 Here's Nick's new Workshop Companion Youtube channel:    / @workshopcompanion  

Visit http://www.MyGrowthRings.com
Follow on Instagram @MyGrowthRings
I also blog at http://www.tool-hunter.com and http://shopsmith-tool-hunter.blogspot...

Visit http://www.MyGrowthRings.com
Follow on Instagram @MyGrowthRings
I also blog at
and http://shopsmith-tool-hunter.blogspot...

A few viewers have requested I provide affiliate links to help them find the products I use and as a way of supporting the channel through commission. For example, as an Amazon Associate, I earn from qualifying purchases made through the links I provide. If you purchase a product or service through these links, there is NO additional charge to you. I always recommend shopping around for a better price. Thank you for supporting My Growth Rings!

#Shopsmith #ShopsmithMarkV #HollowChiselMortising