Tavor X95 Micro Surplus MSW. Full Monty disassembly. Warning. IWI IDF Bullpup P1

Описание: Warning: I've been reading the forums, increasingly owners are forgetting to remove the charging handle prior to removing the barrel to which they will damage the charging handle rod and the gas tube. Replacement parts for these aren't easy to find, especially in Canada.

If you need further help with disassembly and reassembly then check out X95 18.5" Full Monty below.

X95 18.5" Full Monty .    • Tavor X95 Full Monty disassembly & field s...  
X95 18.5" Bolt (Type B) and FCG disassembly.    • Tavor X95 Type B Bolt & Trigger Full Monty...  
X95 18.5" vs. Tar21.    • X95 vs Tar-21. Review. IWI Tavor bullpups.  
X95 Micro Surplus 13" review.    • X95 Micro Surplus MSW. Review. IWI Tavor I...  

This gun isn't perfect. My biggest beef is the gas system, it has no regulator and the gas tubes are not easily reachable to clean also there are no access to the port from the bore to the gas tubes. I've concern about the ejector green rubber bubble failing, I prefer they replace it with a metal spring. Finally, design a better barrel locking lug that doesn't slip out of position. Otherwise, I love it.

Disclaimer: this video is for educational purposes only, free of charge. Any part you copied is at your own risk and should be inspected by a professional prior to use.
Due to Youtube's policy. Please do NOT ask for link or post information of where to buy.
Please do not attempt to do my disassembly because it's not made for novices who can't figure out what I'm doing on or off camera also quite often due to the length I don't reassemble or include the FCG which is done separately.
If you like what I do on Youtube and you found some parts useful then please support my channel by pressing the LIKE and the subscribing buttons. If it was of no use to you then thanks for watching and please press next. Making videos are time consuming and not to mention expensive to do... Thank you.