How to make an air tool rack

Описание: I only had a couple of hours in the shop which I wanted to put to good use. Sometimes I don’t have the energy to get deep into a bike project when time is limited.

Tool storage is always on my mind (that is: “how can is store these tools better so I can fit more tools in?” 😁).

While I prefer tools in cupboards and drawers (see my shop tour video which talks about the the dust problem I have from the summer north winds), sometimes I find a small space that just needs to be filled.

The gap under my wall cabinet has never been well utilised, but a quick check showed all but one of my air tools would fit if hung vertically.

Since they all use a common quick-disconnect fitting, a rack that holds the fitting is the logical way to hang them.

Watch the process to simply form some slots in a piece of aluminium stock and bend it to form a mounting surface to the wall under the cabinet.

Other videos in the Shop Equipment series:
Simple timber build platform: https://krankengineering.com/tech/a-s...
How to build a motorcycle build platform (advanced): https://krankengineering.com/tech/mot...
Air compressor overview: https://krankengineering.com/tech/air...
Hercus 9" lathe restoration (playlist): https://krankengineering.com/tech/her...
How to build a killer (lathe) bench (playlist) : https://krankengineering.com/tech/bui...
How to build a 12V-24V bench top power supply: https://krankengineering.com/tech/bui...
How to build a radial draw tube bender (playlist): https://krankengineering.com/tech/rad...
Shop Tour! (2017):    • Shop Tour!