wire numbers

Описание: 1 Create New Project

3 Insert wire numbers automatically

4 Zoom in on the top portion of the wire network on the left side of the
drawing

5 Click Schematic tab ++ Insert Wires/Wire Numbers panel ++ Insert Wire
Numbers drop-down ++ Wire Numbers

6 Pick Individual Wires

7 Add wire numbers to the entire drawing

8 Click Schematic tab ++ Insert Wires/Wire Numbers panel ++ Insert Wire
Numbers drop-down ++ Wire Numbers

9 click Drawing-wide

10 Add wire numbers project-wide

11 Click Schematic tab ++ Insert Wires/Wire Numbers panel ++ Insert Wire
Numbers drop-down ++ Wire Numbers

12 click Project-wide

13 select AEGS03.dwg and AEGS04.dwg then Click Process

14 Wire numbers now insert for the selected drawings

16 Insert PLC I/O wire numbers

17 Open AEGS05.dwg

18 Click Schematic tab ++ Insert Wires/Wire Numbers panel ++ Insert Wire
Numbers drop-down ++ PLC I/O

19 Click I:%n to change the wire number format

20 Select anywhere on the PLC module

21 Select all the connected wires

22 Deleting a wire number

23 Click Schematic tab ++ Edit Wires/Wire Numbers panel ++ Delete Wire
Numbers

24 type ALL and press ENTER

25 The wires in the network change to dashed lines

BY SABRINA, ZALEHA, HAFIZA