How To Get Perfect Bed Adhesion for 3d Printer Resin

Описание: How To Get Perfect Bed Adhesion for 3d Printer Resin

So you have sanded your build plate, done leveling build plate, but after several hours of print time and resin only to find that it's fail.
in this video i want to share how to properly check your build plate level so you don't waste time and resin.
We will calibrate the bottom exposure to get the perfect bed adhesion.

The build plate already wash and clean thoroughly.
The print in video already cured while still attach to build plate for 10s for safe handling.

kindly support my channel   / dennyswang  

Build Plate Leveling Tester
https://cults3d.com/en/3d-model/vario...

Bottom Exposure Calibration
https://cults3d.com/en/3d-model/vario...

Exposure Tester
https://cults3d.com/en/3d-model/vario...

Thicker Validation Matrix
https://cults3d.com/en/3d-model/vario...

Print Angle Model
https://cults3d.com/en/3d-model/vario...

Amder Antialiasing Test
https://cults3d.com/en/3d-model/vario...

Stability Torture Test
https://cults3d.com/en/3d-model/vario...

Oval Tube / Tall Elipse
https://cults3d.com/en/3d-model/vario...

Compression Disk Test
https://cults3d.com/en/3d-model/vario...

Wire Mesh
https://cults3d.com/en/3d-model/vario...

here are the models that i use to test build plate level and calibrate bottom exposure :
https://www.dropbox.com/s/4qodlb6b43t...

Checkout Phrozen Website for Phrozen printer
https://phrozen3d.com/?aff=98

If you in Indonesia, you can buy Phrozen printer at tokopedia here :
https://tokopedia.link/I1hQGRPRpmb

If you are in Indonesia, you can buy NFEP at tokopedia here
https://www.tokopedia.com/yuishimokaw...

#3dprinting #3dprinter #dennyswang

chapters :
0:00 - Intro
0:57 - Build plate level tester
2:23 - Calibrate bottom exposure
7:00 - User tips
8:16 - Closing

If you interested to check my other work
Here my social media
FB :   / nobodycustom  
FB :   / 3dmikron  
IG :   / dennys_wang