How to Replace Front Lower Control Arms 2014-2018 GMC Sierra 1500

Описание: Buy Now!
New Control Arm with Ball Joint from 1AAuto.com https://trq.video/id-1ASLF01269

This video shows you how to install a new quality TRQ lower control arm with ball joint in your 2014-2018 GMC Sierra 1500. Control arms are a crucial part of the suspension system of your vehicle. They not only carry the load of the vehicle to the wheel, but they typically also maintain its alignment. Control arms are typically large and strong, so you may be surprised it needs replacing. They contain rubber bushings for smoother rides at the cost of eventual wear, or integrated ball joints that require replacing the entire arm when they wear.

Estimated installation time for a professional technician is approximately: 2 hours 6 minutes

This repair was done on a 2015 GMC Sierra 1500 SLT 5.3L Extended Cab Pickup 4-Door 4WD Automatic and the process should be similar on the following vehicles:
2014 GMC Sierra 1500
2015 GMC Sierra 1500
2016 GMC Sierra 1500
2017 GMC Sierra 1500
2018 GMC Sierra 1500

Tools you will need:
• Pocket Screwdriver
• Pry Bar https://trq.video/oapS-1AXAA00020
• 18mm Wrench
• 24mm Wrench
• 10mm Socket
• 15mm Socket
• 18mm Socket
• 21mm Socket
• 22mm Socket
• 24mm Socket
• 36mm Socket https://trq.video/odT-1AAST00006
• Ball Joint Press
• Brake Caliper Hanger https://trq.video/oq6-1AXAA00439
• Pickle Fork
• Tie Rod Puller
• Trim Tool Set https://trq.video/oaVd-1AXXX00006
• Snap Ring Pliers
• Wire Cutters
• T30 Socket
• Ratchet
• Torque Wrench https://trq.video/obPr-1AXAA00044
• Bungee Cord
• Copper Anti-Seize
• Gloves https://trq.video/oceF-1AXSS00048
• Safety Glasses
• Floor Jack
• Hammer
• Jack Stands
• Pole Jack
• Wheel Chocks
• Wire Brush https://trq.video/oEN-1AXAA00079

Subscribe:    / @trq  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.