Fix iPhone Charging Slow or Liquid Detected in Connector

Описание: In this video, I’ll show you how to fix iPhone charging issues, including slow charging or the “Liquid Detected in Connector” alert. These problems are often caused by moisture in the Lightning port, dirt, or minor hardware glitches, and knowing the correct steps can prevent damage.

If your iPhone shows a Liquid Detected alert, the first thing to do is disconnect the cable immediately. Unplug the Lightning cable and power adapter, and turn off your device to prevent any electrical damage.

Next, gently tap the iPhone with the connector facing down to remove excess liquid. Then, leave your iPhone in a dry, ventilated area for at least 30 minutes to several hours to allow any remaining moisture to evaporate safely.

Avoid common mistakes like using a hair dryer, compressed air, or rice, as these can damage internal components or push liquid deeper. Instead, use silica gel packets in a sealed container to safely absorb moisture from your device.

Following these steps should help resolve the “Liquid Detected” alert and improve charging performance. If this guide helped, like the video and subscribe for more iPhone troubleshooting tips and tutorials.
Make sure to watch this video till the end, and in case you like the video, make sure you hit the Like button in case you haven't subscribed to our channel, make sure to hit the subscribe button as well.

~Chapters:
0:00 Introduction
0: