Fix Whirlpool F03 E01 Error (F3E1)

Описание: Check your filter basket, your water level air pressure bladder and hose, and your drain pump. If all of that looks good, then inspect the solenoids and diaphragms on your water inlet valve. Replacing the water level switch and water inlet value will more than likely solve the F3E1 error which appears on the display as F03 E01. Depending on how you see/read the error you may have it reversed as E1F3 or E01 F03. It's the same forwards or backwards. See the error code & diagnostic pages at the end of this video for full details on all errors. Most of the errors can be solved by replacing the below parts. WAY cheaper than replacing the washer or hiring someone.

Water Level Switch WPW10448876
https://amzn.to/4jL3fZb

Water Inlet Valve w/Solenoids WPW10247306
https://amzn.to/4jMnINj

Washer Drain Pump WPW10425238 WPW10605427
https://amzn.to/4hNeQW2

DANCO Waterproof Silicone Grease (for O-Rings & Seals)
https://amzn.to/4gynaHW

Turn off the water supply then unplug your machine and WAIT 10-15 minutes before doing any work. Power is stored in the capacitors and it will drain. You can hit the power button the front after unplugging to expedite draining of the stored power. Also, make sure the green wires which are screwed to the chassis (frame) are free from corrosion and are fastened tightly. Bad grounding can cause all kinds of problems with the ACU (computer system).