4 channel 8 function multifunction chase controller

Описание: 5 amps maximum total load (1.25 amps per channel)

Connect up to four runs of Standard Plug light strings to create a mini light show

Choose from 8 Lighting Effects:

Combination
In Waves
Sequential
Slo-Glo
Chasing / Flash
Slow Fade
Twinkle / Flash
Steady On
A heavy duty four channel sequencer brings life to your lighted animation. Each channel can handle 1.25 amps. Eight sequences are built into this weatherproof unit including: combination, waves, sequential, slo-glo, chasing/flashing, slow fade, twinkle/flash and steady on. One button on the front of the unit changes the sequence that is running. Recycle the power to the unit and it remembers which sequence was last running. Its dimensions are 2-1/2" wide, 3-3/4" high and 1" deep. Non-grounded unit with non-polarized female plugs. 120VAC, 60 HZ use only. Has slight crosstalk/crossover between channels as they change from one to the next.

How Do Chase Controllers Work?
Chase controllers create effects across the channels of the controller and allow you to do all sorts of creative things with lighting. For example, a 4 channel chase controller will turn channel 1 on and then off when channel 2 comes on, channel off when channel 3 comes on, channel 3 off when channel 4 comes on, and then the sequence repeats. The same is true of 2 and 3 channel chase controllers. The speed of the chase between channels is controlled by a dial on the front of the controller.

Multifunction Controllers
Multifunction controllers like our 3 channel and 4 channel multifunction controllers contain 8 different effects that apply themselves across the channels. Effects include slow chase, fast chase, twinkle, shimmer, all on, slow glow, cross fade and all glow. There is no speed control dial on the multifunction controllers

Other Controllers
Our higher end controllers from PBS lighting do have additional functionality such as the Animator controller which is programmable to be a 2, 3 or 4 channel chase controller and does not have any crosstalk. They can be connected to computer controlled light controllers such as those from Light-O-Rama and the Light-O-Rama effects will be passed through to the channels on the animator controller and they have a much higher average lifespan.

Can A Chase Controller Make My Standard Lights Chase Down The Strand?
NOTE: No. Chase controllers do not make bulbs on standard light strands chase down the strand. No controller can make standard lights chase down a strand. Rather, they apply the chase or other effects across channels.

Do These Controllers Work With LED Lights?
Yes, in most cases they will work fine. There are some older LED light sets that do have issues with light controllers of any kind and will not work with any light controller. But most newer, commercial and professional grade rectified, dimmable LED lights will work fine with light controllers.

Available at The Christmas Light Emporium
https://thechristmaslightemporium.com...