How I Use a Tower-Style Terp Slurper (30mm Flex Coil + E-Nail Setup Breakdown)

Описание: A customer asked how to use a tower-style terp slurper, so I wanted to walk through the exact process I use every day with my old e-nail controller and a 30mm flex coil.

I’m using a 30mm, 10-wrap flex coil on a tower-style terp slurper setup, plus the same controller box we’ve been selling for over 15 years. Any of our controllers still power these coils perfectly. The setup is simple: the slurper, a spinning pillar, and a marble that works as your carb cap.

I show how I load a small bit of rosin, how I position the coil so the slurper sits balanced, and what to do if the pillar gets too sticky and stops spinning. Then I walk through my full cleaning method — I don’t Q-tip these. I use a two-bath rubbing alcohol system: one dirty bath to strip reclaim, and one clean bath to finish it off. This keeps the clean jar clear way longer.

Once everything’s cleaned, wiped, and ready, it only takes about 5–7 minutes to get back to temp for the next session.

If you want to check out the gear I use in the video, here are the exact parts:

🔗 Terp Slurpers (Tower Style + More Options)
https://ineedhemp.com/product/terp-sl...

🔗 10mm Glass Rig Kit (Budget-Friendly Daily Driver)
https://ineedhemp.com/product/10mm-gl...

🔗 Flex Coils (30mm & 25mm – Compatible With All DT Controllers)
https://ineedhemp.com/product/enail-f...

If you have questions about coils, heat settings, pillars, marbles, or cleaning your slurper, just drop a comment — happy to help.
#terpslurper #enail #flexcoil #dabs #rosin #concentrates #divinetribe #ineedhemp #dabsetup #slurper