Vmc Programming I Rapid & linear Feed Mototion I G00 - G01 Gcode

Описание: Linear Motion is Straight Line Motion
G-Code is about motion, and the most common kind of motion found in part programs is straight line or linear motion. Motion is another one of those things in g-code that is modal. You tell the controller what kind of motion you’d like with a g-code and it remembers to always make that kind of motion until you tell it to change using another g-code.

#G00 for Fast Positioning, #G01 for Slower Cutting Motion
There are two codes intended to set up linear motion modes:

G00 G01 Motion GCodes

G01 and G00 for straight line motion…

Rapids motion tells your machine to move at its fastest possible speed. G00 is used to position the cutter near where you want to start cutting, but we never enter a cut with G00. Doing so by mistake ensures a broken cutter or worse as rapids motion is way too fast for any kind of cutting. Most controllers start up with G00 active when you first turn on the machine. That’s because the part program has to manuever the cutter into position near the cut before you can begin removing material. Once the cutter is ready and you want to make cutting motions, you would typically use G01 to specify feed motion.