How to Remove and Install a Tire From a Rim with the LCTX Tire Changer Machine (Step-by-Step Guide)

Описание: Master the full tire service process! This is the ultimate, step-by-step guide for using your LCTX Tire Changer Machine to both remove an old tire and install a new one safely and efficiently. We cover everything from the crucial bead-breaking technique to final tire inflation. Take control of your garage and save on shop fees!

✅ GET YOUR LCTX TIRE CHANGER HERE: http:// tirechanger.base44.app
⚠️ IMPORTANT SAFETY WARNINGS!
Your safety is our priority. Please pay close attention to all safety instructions, especially:

Never stand over the tire while breaking the bead.

Double-check the wheel security before operation.

Hold the tire pry bar FIRMLY during rotation.

🛠️ Complete Tire Service Steps
Follow the precise operational steps from your LCTX Machine manual:

Phase 1: Tire Removal (Demounting)
Deflate the Tire and Break the Bead: Fully deflate the tire, then use the Large Cylinder and Foot Pedal Assembly (#2) to push the bead breaker arm (#4) against the tire sidewall.

Secure the Wheel on the Machine: Place the wheel on the Wheel Hub Securing Assembly (#7), select the correct Cone (#5), and tighten the Large Nut (#6) using the Crescent Locking Wrench (#14).

Adjust and Secure the Duck Head: Position the duck head just inside the rim (1/8 to 1/4 inch gap) and lock it in place using the Hex Wrench (#13).

Remove the Upper Tire Bead: Use the Tire Pry Bar (#8) to lift the top bead over the duck head, then activate the foot pedal to rotate the wheel and pull the bead off the rim.

Remove the Lower Tire Bead: Repeat the pry bar technique for the lower bead, using the machine's rotation to complete the removal. Carefully lift the tire off the machine.

Phase 2: Tire Installation (Mounting)
Lubricate the Tire and Rim: Apply tire lubricant to the beads of the new tire and the rim flanges. This is a crucial step for smooth mounting.

Mount the Lower Tire Bead: Guide the bottom bead onto the rim, using the machine's rotation and the duck head to secure it.

Mount the Upper Tire Bead: Use the pry bar and the machine’s rotation to guide the second (upper) bead over the rim and into position.

Tire Inflation and Bead Seating: Connect the air compressor hose and inflate the tire. The beads will "seat" with an audible pop.

Final Check: Inflate the tire to the correct pressure and remove the wheel from the hub using the Crescent Locking Wrench (#14).

⚙️ Tools and Key Parts Used
Tire Pry Bar (#8)

Large Cylinder and Foot Pedal Assembly (#2)

Duck Head / Hub Adjustment Assembly (#1)

Crescent Locking Wrench (#14)

Valve core removal tool (not included)

Tire lubricant (not included)

how to remove and install a tire, lctx tire changer operation, tire changing machine tutorial, bead breaking guide, how to mount a tire on a rim, lctx machine tire installation, diy tire change machine, duck head adjustment, tire pry bar technique, complete tire service guide

#tirechanger #lctx #tireremoval #tireinstallation #beadbreaker #diymechanics #autotools #garageequipment