SER Stenter Ram Makinesi / SER Stenter Machine

Описание: SER STENTER series; are the machines, each point of which is manufactured carefully, to provide the most efficient operational productivity possible with low energy expenses for finishing operations on the textile products.
Unique chamber isolation feature, cross fan which is designed to achieve efficient us eh eoaft and homogenous air flow – provides energy saving and capacity increase in production between 8%-15% compared to the traditional machines.
Thanks toth e heating and caiirrc ulation sections, which are placed crossly at intervals of three meters, higher air circulation gain and homogenous drying performance is achieved.
Independent air-flow system is achieved through PLC control thanks to two inverters and four fans in each chamber. Air flow in the lower and upper nozzles is independently controlled through two inverters. This way, desired fixing and feeding value is achieved on even the most delicate fabrics.
Thanks to its nozzle structure which can be easily demounted and cleaning doors, the nozzles can be quickly and easily cleaned without being removed from the machine. In addition, internal access doors on both sides of the machine provide easy access to the nozzles.
Diameters of the nozzle holes and numbers of holes are designed with flow simulation analysis and calculations to achieve the most efficient air flow. Air speeds in the nozzle holes are tested in different conditions and equal edge to edge air speed performance is achieved. Slot type nozzle applications are available for coating applications and finishing operations on the fabrics with high pile; and different applications are specially manufactured for lower and upper nozzle distances.
Fabric width control can be gradually increased and decreased (5%-10% according to the type of the fabric) between the chambers thanks to the width adjustment spindles on one in two chambers or on each chamber according to customers demand.

Inlet Units
Single foulard, double foulard, high input, batcher unwinding, centrally driven batcher unwinding and for non-stop fabric working possibility.
Outlet Units
Fabric outlet options can be produced as alternatives which are different in types as sample roll-up, non-stop roll-up, batcher, tangential batcher, centrally – driven batcher and plaiter type.
Foulard Units
It is the standard foulard unit used for squeezing and finishing processes on the knitted and woven fabrics.
Hydrolic Foulard Units
Suitable fabric working range is 1600 mm – 3600 mm.
There is banana cylinder or spreading cylinder covered with rubber before the squeezing cylinders.
Operator Platform
The fabrics with thin piles on the surface (especially velvet type fabrics), the shape of the piles that become reclined to left and right following the pretreatments (brushing, raising etc.) is distorted.
Entry Rail Options
Different types of rail applications at the length of 1.5m, 3m, 3m+1.5m, 3m+3m, 3m+3m+3m are available for finishing operations on the woven, knitted and home textile fabrics.
Pinning Groups
There are opportunities of using edge spreader units of mechanical type, finger type and pneumatic-aired type as alternatives to different types of fabrics.
Edge Cutting Unit
The frame is manufactured as completely stainless.
OverHead Glue System
Edge glue disc can be approached to the disc chain pins as much as it is desired and minumum fabric wastage is achieved.
Steaming Unit
It is mounted to the rails at “V” angle and in a suspended form.
Filter System
Special structured filter can be used for different types of fabrics and machine combinations.
Nozzle Structure
It has a nozzle structure which is galvanized, long lasting and easy to demount.
Heating Systems
Heating systems are provided as thermal oil, natural gas, steam or double heating system (thermal oil+gas, steam+gas) option are used together.
Insulation Structure
Thanks to the chamber and cover insulation structure, specially developed differently from traditional machines, it provides energy saving in the range of 8%-15%.

Technical Data|Technical Specifications
Universal stenter frame with single padder to process knitted and woven fabrics.
Universal stenter frame with double padder for processing knitted fabrics.
Stenter frame equipped with inlet and exit j-box, single padder for processing woven fabrics.
Universal stenter frame equipped with double padder, vertical chain arrangement for processing knitted fabrics.
Stenter range equipped with coating machine for processing woven fabric.
High fabric inlet stenter frame equipped with hydrolic padder to process open width home textiles.

Please read more:
https://sermekatronik.com.tr/en-ram.html


If you want to order SER Single Shearing Machines or SER equipment presentation, then please contact us: E-mail: [email protected], Tel.: +37063335553, http://termo.partners).

#termopartners #termo #partners #textileindustry #innovation #technology #creativity #future #economy #markets